| Model | AKQ-1500 | AKQ-2000 | AKQ-3000 | AKQ-6000 |
|---|---|---|---|---|
| Laser Power | 1500W | 2000W | 3000W | 6000W |
| Laser Operating Modes | Continuous Wave Laser | |||
| Laser Generator | Raycus/Max/BWT/JPT | |||
| Laser Wavelength | 1080nm±10nm | |||
| Laser Power Tunability | 10-100% | |||
| Laser Cleaning Head | Au3tech | |||
| Laser Cleaning Width | 10-600mm | |||
| Control System | Au3tech | |||
| Expected Focal Distance | 160mm | |||
| Fiber Cable Length | 10m (JPT:15m) | |||
| Cooling Type | Water Cooling | |||
| Modulation Frequency | ≤20KHz | |||
| Voltage and Frequency | 380V/220V 50/60H | |||
| Working Environment | 10-40℃ | |||
| Operating Humidity | 5-95% | |||
| Comparison Item | Laser Cleaning | Sandblasting | Ultrasonic Cleaning | Dry Ice Blasting |
|---|---|---|---|---|
| Cleaning Principle | Uses focused laser energy to remove rust, paint, oxide, oil, and surface deposits | Uses high-speed abrasive particles to strike and remove contaminants | Uses high-frequency sound waves in liquid to create cavitation bubbles | Uses compressed air to blast dry ice pellets onto the surface |
| Surface Contact | Non-contact cleaning, no mechanical force on the workpiece | Direct impact on the surface with abrasive media | Workpiece must be placed in cleaning liquid | Dry ice pellets impact the surface but sublimate after contact |
| Surface Damage Risk | Low risk when parameters are correctly set | Higher risk of roughening, pitting, or removing base material | Low for many small parts, but unsuitable for some sensitive materials | Lower than sandblasting, but impact force may affect delicate parts |
| Cleaning Precision | Very high; suitable for selective and local cleaning | Lower precision; often cleans a wider area | Good for complex small parts immersed in liquid | Medium precision; better for broad surface cleaning |
| Suitable Materials | Metals, molds, stone, some composites, and selected coated surfaces | Metals, concrete, stone, and heavy-duty surfaces | Small metal, plastic, glass, and precision parts | Metal, rubber, plastic, food equipment, and industrial surfaces |
| Rust Removal | Very effective for light to heavy rust on metal surfaces | Very effective for heavy rust and scale | Limited; better for oil, grease, and fine particles | Moderate; better for dirt, oil, paint, and light residues |
| Paint Removal | Can remove paint layer by layer with controlled parameters | Fast paint removal but may damage the substrate | Not ideal for thick paint removal | Effective for some coatings, but not always for thick or hard paint |
| Oil and Grease Removal | Effective, especially with proper laser settings | Possible but may spread contamination or need extra treatment | Very effective for oil and grease on small parts | Effective for oil and grease without water |
| Cleaning Speed | Fast for targeted areas and automated production lines | Fast for large rough surfaces | Slower because parts need soaking and drying | Fast for large surfaces and production equipment |
| Environmental Impact | No abrasive waste, usually low secondary pollution | Produces dust, spent abrasive, and contaminated waste | Requires cleaning liquid and wastewater treatment | No blasting media residue, but requires CO₂ dry ice supply |
| Consumables | No regular cleaning media required | Requires sand, grit, or other abrasive media | Requires cleaning solution and sometimes additives | Requires dry ice pellets and compressed air |
| Operating Cost | Higher initial cost, lower consumable cost | Lower equipment cost, higher ongoing media and cleanup cost | Moderate cost, depending on tank size and liquid use | Ongoing dry ice and compressed air costs can be high |
| Equipment Investment | Higher initial investment | Usually lower initial investment | Low to medium for small systems; higher for large industrial tanks | Medium to high depending on system size |
| Automation Capability | Excellent; easy to integrate with robots, CNC systems, and production lines | Possible, but media handling and dust control are more complex | Suitable for batch cleaning, less flexible for large parts | Can be automated, but dry ice supply must be managed |
| Cleaning of Complex Shapes | Good for accessible surfaces, corners, welds, and molds | Good for exposed surfaces but may be uneven in narrow areas | Excellent for small complex parts fully immersed in liquid | Good for many shapes, but deep narrow gaps may be difficult |
| Post-Cleaning Treatment | Usually little or no post-cleaning required | Often requires dust removal and surface finishing | Requires rinsing and drying | Usually little residue, but moisture/condensation may need attention |
| Worker Safety | Requires laser safety glasses, enclosure, and fume extraction | Requires dust protection, blasting suit, and hearing protection | Requires chemical handling and liquid safety measures | Requires ventilation, hearing protection, and care with cold materials |
| Noise Level | Relatively low to medium depending on system and extraction | High noise during blasting | Low to medium | High due to compressed air blasting |
| Best Application Scenarios | Precision rust removal, weld cleaning, mold cleaning, oxide removal, coating removal, and automated cleaning | Heavy rust, scale, old coating removal, and rough surface preparation | Small precision parts, medical parts, electronics parts, and oil removal | Food equipment, molds, production lines, and cleaning without water |
| Main Limitation | Higher purchase cost and need for laser safety control | Dust, abrasive waste, surface roughening, and cleanup work | Limited by tank size, liquid use, and drying requirements | Requires dry ice supply, compressed air, and good ventilation |
AccTek Laser uses advanced fiber laser technology to ensure stable performance and precise cleaning results. Their machines provide efficient removal of rust, paint, oil, and coatings while protecting the base material, making them suitable for many industrial cleaning applications.
AccTek Laser offers a variety of laser cleaning machines with different power levels and configurations. Customers can choose from portable handheld machines to high-power industrial systems, allowing businesses to select the most suitable equipment for their specific cleaning tasks.
AccTek Laser machines are built with reliable components such as premium fiber laser sources, high-speed scanning systems, and durable control units. Using quality parts improves system stability, extends machine lifespan, and ensures consistent performance during long-term industrial operation.
AccTek Laser provides flexible customization based on customer needs. Laser power, cooling systems, cleaning width, and automation options can be adjusted according to different applications. This helps businesses achieve optimal cleaning efficiency for various materials and contamination types.
AccTek Laser offers comprehensive technical support, including machine selection guidance, installation assistance, and operation training. Their experienced engineering team helps customers quickly understand the equipment and ensures smooth machine operation after installation.
AccTek Laser serves customers in many countries and provides dependable international service. Detailed documentation, remote technical support, and responsive after-sales service help customers maintain machine performance and minimize downtime during daily production operations.
Is laser dust removal harmful to humans? This guide covers health risks, safety standards, protective measures, and best practices for safe industrial laser dust removal.
This article systematically explains the types and principles of laser cleaning machine cooling systems, daily inspection and maintenance procedures, and methods for diagnosing and handling common faults, helping users quickly
This article will systematically analyze the main limitations of laser cleaning from an engineering and application perspective, and provide mature and practical solutions to help manufacturing companies make informed decisions.
This article delves into the safety operation training requirements for laser cleaning machines in industrial applications, covering laser safety, protective equipment, equipment maintenance, risk management, and compliance standards.
The price of a 2000w laser cleaning machine can vary widely based on several factors including brand, quality, features, additional accessories, and specific suppliers or manufacturers. It’s difficult to give an exact price without specific details about the machine and manufacturer. Typically, a 2000w laser cleaning machine ranges from $4,000 to $5,000 depending on the complexity and capabilities of the machine.
It is important to note that pricing information may change over time due to market fluctuations and technological advancements. Therefore, it is recommended to contact the laser cleaning machine manufacturer, supplier, or distributor directly to obtain accurate and up-to-date pricing information for the specific 2000w laser cleaning machine model that meets your requirements. They can provide you with detailed quotes and pricing information based on your specific needs and any other services or accessories you may require. If you are looking for a laser cleaning machine, you can contact us. AccTek Laser engineers will provide you with customized laser cleaning solutions according to your needs.
The AccTek Laser 2000W laser cleaning machine supports a standard cleaning width of 270mm. However, it also offers optional configurations for wider cleaning widths of 450mm and 600mm. You can choose the right cleaning width option while purchasing the machine based on your specific needs and requirements.
When operating a 2000w laser cleaning machine or any high-power laser equipment, proper safety precautions need to be followed to ensure personnel safety and prevent accidents. Here are some key safety precautions to consider:
Note that these safety precautions are general guidelines only, and specific safety requirements may vary by laser cleaning machine manufacturer and model. Always refer to the manufacturer’s instructions, safety manual, and relevant safety regulations in your jurisdiction for comprehensive safety guidance.
The 2000w laser cleaning machine is capable of cleaning a wide variety of materials, but there are some limitations to consider. The suitability of a laser cleaning process for a particular material depends on factors such as the material’s optical properties, thermal conductivity, and response to the laser wavelength. It can be applied to a variety of materials, including metals (such as steel, aluminum, copper, etc.), ceramics, composites, plastics, stone, and more. However, some materials may not be suitable for laser cleaning or may require special considerations. Here are some factors that can affect the effectiveness of laser cleaning on different materials:
While a 2000w laser cleaning machine can handle a wide variety of materials, the specific characteristics and requirements of the material you are cleaning must be considered. Testing or consulting with manufacturers and laser cleaning experts can help determine the best laser parameters and cleaning methods for different materials. In addition, laser cleaning is a versatile process that will continue to expand the capabilities of laser cleaning machines as technology advances, allowing for more efficient cleaning of a variety of materials.
The life expectancy of a 2000w laser cleaning machine depends on several factors, including the quality of the machine, its brand, the specific components used, and the maintenance methods followed. Generally speaking, a well-maintained and properly used laser cleaning machine can last for thousands of hours.
Regular maintenance is essential to ensure optimum performance and extend the life of your machine. Here are some common maintenance requirements for laser cleaning machines:
It is important to note that different laser cleaning machine models and manufacturers may have different maintenance requirements. Always refer to the manufacturer’s guidelines and recommendations for maintenance procedures and intervals specific to your machine. Additionally, proper operator training and following safety procedures can also prevent damage to the machine and prolong its life.
Yes, there are specific power requirements and installation considerations that should be considered when setting up a 2000w laser cleaning machine. Here are some key factors to consider:
Be sure to refer to the manufacturer’s guidelines and recommendations for the specific model of the 2000w laser cleaning machine you are installing. They can provide detailed information on power requirements, cooling systems, installation considerations, and any other specific requirements for the safe and efficient operation of the machine.
Yes, 2000w laser cleaning machines usually need additional cooling equipment to dissipate the heat generated during operation. A laser cleaning machine will have a high-power laser generator that generates a lot of heat. Proper cooling can keep the laser cleaning machine stable and prevent system damage.
The cooling equipment used may vary depending on the specific design and requirements of the laser cleaning machine. Here are some common cooling methods:
Specific cooling requirements may vary by the make and model of the laser cleaning machine. It is necessary to follow the manufacturer’s recommendations for a proper cooling system and to ensure it is properly installed, maintained, and monitored during operation. During installation, proper ventilation and clearance around cooling equipment must be ensured to facilitate efficient heat dissipation. Regular maintenance and monitoring of the cooling system can prevent any malfunctions and problems that may affect the performance and service life of the laser cleaning machine.
Proper cooling is critical to maintaining the longevity and performance of your laser cleaning machine. Insufficient cooling can result in overheating, reduced efficiency, and potential damage to machine components. Therefore, it is imperative to ensure that the cooling system is properly selected, installed, and maintained according to the manufacturer’s recommendations.
The 2000w laser cleaning machine usually incorporates multiple safety measures to protect the user and the surrounding environment. While specific features may vary by manufacturer and model, here are some common safety measures found in laser cleaning machines:
It’s important to note that specific safety measures and features may vary between different laser cleaning machine models and manufacturers. Always refer to the manufacturer’s documentation, safety guidelines, and relevant safety regulations in your jurisdiction for comprehensive information on the safety measures employed with a particular 2000w laser cleaning machine. Additionally, proper training and adherence to laser safety best practices can keep your laser cleaning machine operating safely.
4 reviews for 2000W Laser Cleaning Machine
Sophie –
This laser cleaning machine has been easy to integrate into our workflow. I use it mostly for removing surface contaminants before assembly. The handheld head is comfortable and gives me good control, even on small parts. The machine itself feels stable and runs smoothly during operation. I also like how quiet it is compared to the older equipment we used before. The cooling system keeps everything running without interruption, which is important for our production schedule. The controls are clear and easy to adjust. It’s a dependable tool that has helped improve our overall efficiency.
Laura –
From a quality control perspective, this machine has been very helpful. The cleaning is precise and doesn’t damage the material, which is important for inspection standards. The system runs smoothly, and the results are consistent across different batches. I find the interface easy to use when adjusting settings for different tasks. The safety features also give me confidence when operators are working nearby. It’s a reliable piece of equipment that supports our quality goals without adding extra complications.
Eric –
I’ve worked with different cleaning systems over the years, and this laser machine has been one of the more reliable ones. The performance is steady, especially when handling larger surfaces that require consistent output. I like how the beam doesn’t fluctuate, which helps keep the results even. The machine is also easy to move around our facility, which saves time during setup. The cooling system does its job well, even during long shifts. Another thing I noticed is how simple the controls are. It didn’t take long to get used to them. Overall, it’s a practical machine that fits well into our daily operations.
Brian –
We use this laser cleaning machine in different departments, and it has adapted well to each task. The mobility is a big advantage, since we often move equipment between work areas. The laser output remains stable, which helps maintain consistent cleaning quality. The control interface is easy to use, even for operators with limited experience. I also appreciate the safety system, which adds an extra layer of protection. The machine has been running smoothly since we installed it, and it hasn’t caused any major issues. It has definitely improved our overall efficiency.