| Model | AKJ-20120F | AKJ-25120F | AKJ-30120F | AKJ-35120F | AKJ-40120F | AKJ-45120F |
|---|---|---|---|---|---|---|
| Cutting Range | 2000*12000mm | 2500*12000mm | 3000*12000mm | 3500*12000mm | 4000*12000mm | 4500*12000mm |
| Laser Power | 1500-12000W | |||||
| Laser Generator | Raycus/Max/IPG | |||||
| Control System | Cypcut | |||||
| Laser Cutting Head | Raytools/Boci | |||||
| Transmission System | Rack Drive | |||||
| Rack | VASTUN/Apex/YYC | |||||
| Guide Rail | HIWIN | |||||
| Gear Reducer | Motoreducer | |||||
| Ball Screw | TBI | |||||
| Servo Motor | Yaskawa | |||||
| Electronic Components | Schneider | |||||
| Pneumatic Components | SMC/AirTAC | |||||
| Water Chiller | S&A/Hanli | |||||
| Maximum Moving Speed | 100m/min | |||||
| Maximum Acceleration | 1.0G | |||||
| Positioning Accuracy | ±0.01mm | |||||
| Repeat Positioning Accuracy | ±0.03mm | |||||
| Voltage and Frequency | 380V 50Hz/60HZ | |||||
| Comparison Item | Laser Cutting | Plasma Cutting | Waterjet Cutting | Mechanical Cutting |
|---|---|---|---|---|
| Cutting Principle | Focused laser beam melts/vaporizes material | Ionized gas (plasma arc) melts metal | High-pressure water with abrasives erodes material | Physical force using blades/tools |
| Material Compatibility | Metals, some non-metals | Conductive metals only | Almost all materials | Mostly metals and soft materials |
| Cutting Precision | Very high (±0.01–0.05 mm) | Medium (±0.1–0.5 mm) | High (±0.05–0.1 mm) | Low to medium |
| Edge Quality | Smooth, clean, minimal burr | Rougher, requires finishing | Smooth, no heat marks | Often requires deburring |
| Heat-Affected Zone (HAZ) | Very small | Large | None (cold cutting) | None or minimal |
| Cutting Speed | Very fast (especially thin metals) | Fast (thick metals) | Slow to medium | Medium |
| Thickness Capability | Medium to thick (depends on power) | Excellent for thick metals | Excellent for very thick materials | Limited by tool strength |
| Kerf Width | Very narrow | Wider | Medium | Wide |
| Material Deformation | Minimal | Moderate due to heat | None | Possible due to force |
| Automation Capability | Highly automated (CNC/robotic) | Automated | Automated | Semi-automatic or manual |
| Operating Cost | Medium to high (depends on laser type) | Medium | High (abrasives + maintenance) | Low to medium |
| Maintenance Requirements | Moderate (optics, source) | Moderate (consumables) | High (pumps, seals) | Low |
| Environmental Impact | Low emissions, clean process | Produces fumes and gases | No heat, but water disposal needed | Generates chips and noise |
| Noise Level | Low | High | High | Medium |
| Setup Time | Quick | Moderate | Longer setup | Quick |
| Tool Wear | No physical tool wear | Electrode/nozzle wear | Nozzle wear, abrasive usage | High tool wear |
| Ability for Complex Shapes | Excellent (fine details) | Good | Excellent | Limited |
| Secondary Processing Needed | Rarely | Often required | Rarely | Often required |
| Energy Efficiency | High | Medium | Low (high power consumption) | Medium |
| Typical Applications | Precision parts, electronics, automotive | Heavy metal fabrication, shipbuilding | Aerospace, composites, stone cutting | Basic fabrication, construction |
AccTek Laser integrates advanced laser technology into its cutting machines to deliver high precision, stable performance, and efficient cutting results. Their systems use reliable laser sources and optimized control systems, ensuring that operators achieve consistent cuts with minimal material waste. This innovation also helps in enhancing material quality while reducing the risk of thermal damage during the cutting process.
AccTek Laser offers a broad selection of laser cutting machines with different power levels and configurations to suit diverse application requirements. Customers can choose from compact, portable systems for small-scale operations to large industrial machines for high-volume cutting tasks. This makes it easy to find the right solution for cutting metal sheets, plastics, ceramics, and more, ensuring versatility for various industries.
AccTek Laser machines are built using top-quality components sourced from globally recognized suppliers. This includes durable laser sources, cutting-edge scanning systems, and reliable control electronics. By using premium parts, AccTek Laser enhances machine stability, extends service life, and ensures consistent performance under demanding operating conditions, ultimately reducing maintenance needs.
AccTek Laser provides flexible customization options to meet specific customer needs. Machine features like laser power, cutting speed, cooling systems, and automation integration can be tailored to suit different production environments and application requirements. This flexibility ensures that customers achieve optimal cutting performance, productivity, and cost-efficiency.
AccTek Laser offers comprehensive technical support throughout the entire purchase and operation process. Their experienced team assists with machine selection, installation, operation training, and troubleshooting. This level of support helps customers seamlessly adapt to laser cutting technology, ensuring smooth operations and quick issue resolution when necessary.
With years of experience serving customers globally, AccTek Laser provides dependable international service and support. They offer detailed documentation, remote assistance, and responsive after-sales service to help customers maintain their machines and minimize downtime. This ensures that customers can continue their operations with minimal disruptions, enhancing long-term productivity and customer satisfaction.
This article examines CO2 laser cutting machines, covering how they work, their key advantages and disadvantages, a direct comparison with fiber laser generators, and guidance on when to choose each
This article examines how cooling systems impact laser cutting machine performance, covering heat generation, cooling types, key parameters, effects on cutting quality, reliability, energy efficiency, and maintenance best practices.
This article explores the training and expertise needed to operate laser cutting machines effectively, covering core skills, technical training, safety compliance, CAD knowledge, and hands-on experience for professionals.
Learn the key environmental considerations and regulations for CO2 laser cutting machines, including emissions, ventilation, waste management, OSHA, EPA, and global compliance standards.
Its widths often range from 2–4 m, and lengths can extend 12–20 m or more, depending on the modular bed configuration. Highlight that the modular design allows expansion to meet future production requirements.
The ground rail large-format fiber laser cutting machine offers a variety of power options to meet different cutting needs: 3000W, 4000W, 6000W, 12000W, 20000W, 30000W, and 40000W. These options allow flexibility for various materials and thicknesses, depending on your production requirements.
The ground rail large-format fiber laser cutting machine is capable of cutting a wide range of metal materials with high precision and efficiency. Its primary cutting materials include:
Thanks to its high-power fiber laser source and intelligent control system, the machine delivers clean, precise cuts across these materials, even on thick plates and oversized sheets, making it highly versatile for industrial manufacturing.
Our laser cutting machine package includes comprehensive technical support options designed to ensure smooth operation and help you maximize machine efficiency. We offer:
Both support options are aimed at helping you achieve the best possible results with your machine. Please let us know if you’d like further details or if you’re interested in arranging on-site training.
Our laser cutting machine is backed by a comprehensive warranty designed to give you peace of mind and protect your investment:
Please note that this warranty excludes damage resulting from improper use, mishandling, or other artificial causes.
Our laser-cutting machine is certified with internationally recognized standards to ensure quality, safety, and compliance with industry requirements.
If additional certifications are required for specific regions or industries, please let us know, and we can provide further information.
Yes, all our laser cutting machines are equipped with an auto-focus feature to enhance cutting precision and ease of operation.
The auto-focus capability automatically adjusts the focal distance of the laser beam based on the material thickness and type. This feature is especially beneficial for users who work with various materials or need to switch between different thicknesses frequently. By automatically optimizing the focus, the machine ensures consistent, high-quality cuts without the need for manual adjustments, which saves time and minimizes errors.
Additionally, the auto-focus function enhances cutting efficiency, allowing for faster processing speeds and reducing setup time. This feature is ideal for both intricate designs and high-volume production, ensuring precise results across all types of materials. If you have specific applications in mind, we would be happy to discuss how the auto-focus feature can improve your workflow.
Our laser-cutting machine system supports a variety of file formats, including DXF, AI, PLT, SVG, PDF, and DWG. These formats ensure compatibility with popular design and CAD software, making it easy to import and work with detailed drawings, vector designs, and technical files. If you have any additional format requirements, feel free to let us know, and we can verify compatibility.
4 reviews for Ultra-large Format Fiber Laser Cutting Machine
Rachel –
Since adding this machine to our facility, planning has become more predictable. It runs reliably, so we can schedule jobs with more confidence. I’ve noticed fewer delays caused by machine issues, which helps us stay on track. The cutting quality remains consistent, even during busy periods. My team doesn’t spend much time troubleshooting, which improves efficiency. It fits well with our current setup and supports a smoother workflow. It’s not a complicated machine, but it does what we need it to do, and that makes a big difference in daily operations.
Amber –
I use this machine every day, and it’s been easy to work with. The controls are clear, so I don’t waste time trying to figure things out. What stands out to me is how smooth the movement is during cutting. It feels stable, and that helps keep the results consistent. The cutting head does a good job, and the edges come out clean most of the time. I don’t have to do much extra work after. Even during longer shifts, it runs without issues. It’s a dependable machine that makes my daily tasks easier.
Victor –
We’ve been running this laser cutting machine for several months, and it has been steady from the start. The structure feels solid, especially the base, which keeps everything stable during long shifts. I’ve noticed less vibration compared to our previous setup, and that has improved accuracy. The machine moves smoothly, even at higher speeds, and responds well when we adjust settings. My team didn’t take long to learn the system, which helped us get up to speed quickly. The cutting quality has been consistent across different materials. It’s a reliable machine that fits well into our daily production work.
Nathan –
We added this machine as part of a production upgrade, and it has performed well so far. The laser output is stable, which helps maintain consistent quality. The motion system, including the guide rail and motor setup, keeps positioning accurate. I’ve checked repeat jobs, and the results stay within our required range. The gear system also helps keep movement controlled during speed changes. It was easy to integrate into our existing workflow. It’s not overly complex, which makes it easier for the team to manage. Overall, it’s a dependable solution for daily operations.