| Model | AKJ1530F | AKJ1545F | AKJ1560F | AKJ2030F | AKJ2040F | AKJ2060F | AKJ2560F |
|---|---|---|---|---|---|---|---|
| Cutting Range | 1500*3000mm | 1500*4500mm | 1500*6000mm | 2000*3000mm | 2000*4000mm | 2000*6000mm | 2500*6000mm |
| Laser Power | 1500-40000W | ||||||
| Laser Generator | Raycus/Max/IPG | ||||||
| Control System | Au3tech/Cypcut | ||||||
| Laser Cutting Head | Au3tech/Raytools/Boci | ||||||
| Transmission System | Rack Drive | ||||||
| Rack | VASTUN/Apex/YYC | ||||||
| Guide Rail | HIWIN | ||||||
| Gear Reducer | Motoreducer | ||||||
| Ball Screw | TBI | ||||||
| Servo Motor | Delta/Yaskawa | ||||||
| Electronic Components | Schneider | ||||||
| Pneumatic Components | SMC/AirTAC | ||||||
| Water Chiller | S&A/Hanli | ||||||
| Maximum Moving Speed | 100m/min | ||||||
| Maximum Acceleration | 1.0G | ||||||
| Positioning Accuracy | ±0.01mm | ||||||
| Repeat Positioning Accuracy | ±0.03mm | ||||||
| Voltage and Frequency | 380V 50Hz/60HZ | ||||||
| Comparison Item | Laser Cutting | Plasma Cutting | Waterjet Cutting | Mechanical Cutting |
|---|---|---|---|---|
| Cutting Principle | Focused laser beam melts/vaporizes material | Ionized gas (plasma arc) melts metal | High-pressure water with abrasives erodes material | Physical force using blades/tools |
| Material Compatibility | Metals, some non-metals | Conductive metals only | Almost all materials | Mostly metals and soft materials |
| Cutting Precision | Very high (±0.01–0.05 mm) | Medium (±0.1–0.5 mm) | High (±0.05–0.1 mm) | Low to medium |
| Edge Quality | Smooth, clean, minimal burr | Rougher, requires finishing | Smooth, no heat marks | Often requires deburring |
| Heat-Affected Zone (HAZ) | Very small | Large | None (cold cutting) | None or minimal |
| Cutting Speed | Very fast (especially thin metals) | Fast (thick metals) | Slow to medium | Medium |
| Thickness Capability | Medium to thick (depends on power) | Excellent for thick metals | Excellent for very thick materials | Limited by tool strength |
| Kerf Width | Very narrow | Wider | Medium | Wide |
| Material Deformation | Minimal | Moderate due to heat | None | Possible due to force |
| Automation Capability | Highly automated (CNC/robotic) | Automated | Automated | Semi-automatic or manual |
| Operating Cost | Medium to high (depends on laser type) | Medium | High (abrasives + maintenance) | Low to medium |
| Maintenance Requirements | Moderate (optics, source) | Moderate (consumables) | High (pumps, seals) | Low |
| Environmental Impact | Low emissions, clean process | Produces fumes and gases | No heat, but water disposal needed | Generates chips and noise |
| Noise Level | Low | High | High | Medium |
| Setup Time | Quick | Moderate | Longer setup | Quick |
| Tool Wear | No physical tool wear | Electrode/nozzle wear | Nozzle wear, abrasive usage | High tool wear |
| Ability for Complex Shapes | Excellent (fine details) | Good | Excellent | Limited |
| Secondary Processing Needed | Rarely | Often required | Rarely | Often required |
| Energy Efficiency | High | Medium | Low (high power consumption) | Medium |
| Typical Applications | Precision parts, electronics, automotive | Heavy metal fabrication, shipbuilding | Aerospace, composites, stone cutting | Basic fabrication, construction |
AccTek Laser integrates advanced laser technology into its cutting machines to deliver high precision, stable performance, and efficient cutting results. Their systems use reliable laser sources and optimized control systems, ensuring that operators achieve consistent cuts with minimal material waste. This innovation also helps in enhancing material quality while reducing the risk of thermal damage during the cutting process.
AccTek Laser offers a broad selection of laser cutting machines with different power levels and configurations to suit diverse application requirements. Customers can choose from compact, portable systems for small-scale operations to large industrial machines for high-volume cutting tasks. This makes it easy to find the right solution for cutting metal sheets, plastics, ceramics, and more, ensuring versatility for various industries.
AccTek Laser machines are built using top-quality components sourced from globally recognized suppliers. This includes durable laser sources, cutting-edge scanning systems, and reliable control electronics. By using premium parts, AccTek Laser enhances machine stability, extends service life, and ensures consistent performance under demanding operating conditions, ultimately reducing maintenance needs.
AccTek Laser provides flexible customization options to meet specific customer needs. Machine features like laser power, cutting speed, cooling systems, and automation integration can be tailored to suit different production environments and application requirements. This flexibility ensures that customers achieve optimal cutting performance, productivity, and cost-efficiency.
AccTek Laser offers comprehensive technical support throughout the entire purchase and operation process. Their experienced team assists with machine selection, installation, operation training, and troubleshooting. This level of support helps customers seamlessly adapt to laser cutting technology, ensuring smooth operations and quick issue resolution when necessary.
With years of experience serving customers globally, AccTek Laser provides dependable international service and support. They offer detailed documentation, remote assistance, and responsive after-sales service to help customers maintain their machines and minimize downtime. This ensures that customers can continue their operations with minimal disruptions, enhancing long-term productivity and customer satisfaction.
This article examines how cooling systems impact laser cutting machine performance, covering heat generation, cooling types, key parameters, effects on cutting quality, reliability, energy efficiency, and maintenance best practices.
This article explores the training and expertise needed to operate laser cutting machines effectively, covering core skills, technical training, safety compliance, CAD knowledge, and hands-on experience for professionals.
Learn the key environmental considerations and regulations for CO2 laser cutting machines, including emissions, ventilation, waste management, OSHA, EPA, and global compliance standards.
This article explores the various factors that contribute to the operating costs of laser cutting machines, including energy consumption, materials, labor, maintenance, and technological advancements.
The price of a 15KW laser cutting machine typically ranges from $85,000 to $120,000. The final cost can vary depending on factors such as the manufacturer, additional features, automation options, and customization requirements. Machines with advanced features like automatic loading/unloading systems, advanced control systems, or enhanced cooling units may be on the higher end of the price range.
It’s important to consider not just the purchase cost but also long-term factors like maintenance, operational costs, and training, which can influence the total investment in the machine. Proper evaluation based on your specific production needs and cutting requirements will help determine the best value for your investment.
The 15KW laser cutting machine is designed to efficiently cut a wide range of metal materials, each offering distinct advantages.
The 15KW laser cutting machine is highly efficient for cutting these metals, offering advantages such as speed, precision, and high-quality finishes, even for complex and thick materials.
The 15KW laser cutting machine can cut a variety of metal materials with remarkable precision and efficiency. The thicknesses it can handle for different materials are:
This wide range of cutting capabilities makes the 15KW laser cutting machine versatile and reliable for high-precision cutting in various industries.
The cutting speed of a 15KW laser cutting machine depends on several factors, including material type, thickness, cutting parameters, and the assist gas used. However, here are general guidelines for cutting speeds on various materials:
The cutting speed of the 15KW laser cutting machine is highly efficient, achieving fast cutting speeds for various materials while maintaining exceptional cutting quality and precision, particularly for thicker metals.
The power consumption of a 15KW laser cutting machine can be broken down based on its key components. Here’s a detailed breakdown of the estimated power usage:
This means the machine typically consumes between 58.6 kW and 60 kW of electricity during operation, depending on the specific model, system configuration, and operating conditions. The 15KW laser cutting machine requires higher overall power consumption than its nominal cutting power due to the additional systems for cooling, movement, and air compression. This breakdown will help you understand the energy requirements for operating the machine and ensure your facility is prepared with the necessary power supply.
Yes, a 15KW laser cutting machine can often be customized to meet specific requirements based on the needs of the user or the industry. Customization options typically focus on various aspects of the machine’s configuration, capabilities, and additional features. Here are some common ways in which a 15KW laser cutting machine can be customized:
The 15KW laser cutting machine can be highly customizable, allowing manufacturers to tailor it to their specific operational needs and production goals. These customizations can improve efficiency, precision, and automation, ensuring the machine is optimized for the desired cutting tasks. Always consult with the manufacturer to discuss the customization options available for your particular requirements.
The cutting accuracy of a 15KW laser cutting machine is exceptionally high, making it well-suited for precision applications that require detailed, high-quality cuts. The machine’s key components, including the laser source, cutting head, machine structure, and control systems, all contribute to its impressive accuracy. Here’s a breakdown of the typical cutting accuracy:
The 15KW laser cutting machine offers a cutting accuracy of ±0.05mm to ±0.1mm, along with exceptional edge quality, making it ideal for industries that require high-precision cuts, such as aerospace, automotive, electronics, and medical device manufacturing.
Our laser cutting machine is backed by a comprehensive warranty designed to give you peace of mind and protect your investment:
Please note that this warranty excludes damage resulting from improper use, mishandling, or other artificial causes.
4 reviews for 15KW Laser Cutting Machine
Benjamin –
Operating this laser cutter has been a smooth experience. The control system is simple, and the machine responds quickly to commands. The servo motors help keep movements accurate, even at higher speeds. I also like the cutting head performance, as it keeps focus well on uneven surfaces. The machine runs consistently through long shifts without needing adjustments. It’s reliable, which is important for our workload. Training new staff on it has also been easier than expected. Overall, it’s a practical machine for daily use.
James –
I run a small workshop, and investing in this machine was a big step. It turned out to be worth it. The cutting quality is clean, and the machine handles different materials without trouble. The setup was straightforward, and the interface is easy to understand. The stability from the heavy base is noticeable, especially during longer jobs. It runs quietly compared to what I expected. Maintenance hasn’t been an issue so far. It’s helped us take on more complex projects and improve delivery times. I’m satisfied with how it performs day to day.
Henry –
The build quality is one of the first things I noticed. The welded bed is very sturdy, which reduces vibration during operation. That makes a big difference in precision. The guide rails are smooth, and movement feels controlled. We’ve been able to achieve clean cuts without much adjustment. The machine also handles continuous operation well. It doesn’t overheat easily, and accuracy stays consistent. It’s a solid machine that performs well under pressure.
Lucas –
We’ve been using AccTek Laser equipment for a while now, and this machine meets our expectations. The structure is strong, and the cutting performance is stable. The beam design allows faster movement without affecting accuracy. We process different sheet thicknesses, and the results have been consistent. The intelligent system helps reduce waste, which is important for our costs. It’s been running under heavy use, and we haven’t experienced major downtime. It’s a dependable addition to our production line.