Which Laser Marking Machine Should Your Business Buy: Fiber VS CO2 VS UV
A practical comparison of fiber, CO2, and UV laser marking machines, covering material compatibility, ideal applications, and how portable systems deliver fast ROI for small businesses.
4 reviews for 6 In 1 Laser Welding Cutting Cleaning Marking Machine
Hector –
We make small stainless boxes with seams that stay visible. On the AccTek Group machine, I weld the sides, then switch to cleaning the seams. The first box showed us where we needed a tighter corner fit. The next batch went together easily after we sorted that out. The head change takes a little time, so I weld the whole batch before cleaning the seams. For a small order, I like keeping the boxes in one work area until they’re ready for finishing.
Asha –
I run small lots of metal tabs for electrical assemblies. The machine has a separate welding head that we use for the tabs. I check how each tab sits in the holder so the pieces line up. The first pair goes to our inspector, and I keep an approved sample with the work order for the next person on the machine. I like that the station can handle these short batches. The tray of tabs fits into the schedule around the rest of our welding work.
Aaron –
We use the marking head for part numbers on steel brackets. A few of our brackets look almost the same until you set them against the assembly. I line up a small batch in a holder and check where the number will sit on the finished part. We moved the mark on one drawing because it landed under a washer. Now the crew can read the number after the bracket goes on. That has helped us keep similar parts apart when two orders reach assembly at the same time.
Marta –
I look after equipment at a small shop. We had an old steel cover with a damaged corner. I used the laser to clean rust from the area we were repairing and cut a small patch from a fresh sheet. I tried the patch in place before welding and filed one corner to get the fit I wanted. The machine suits that kind of work. I can handle the prep, cutting, and welding in one place, which helps when a repair comes in between regular jobs.