| Model | AKJ1530F | AKJ1545F | AKJ1560F | AKJ2030F | AKJ2040F | AKJ2060F | AKJ2560F |
|---|---|---|---|---|---|---|---|
| Cutting Range | 1500*3000mm | 1500*4500mm | 1500*6000mm | 2000*3000mm | 2000*4000mm | 2000*6000mm | 2500*6000mm |
| Laser Power | 1500-40000W | ||||||
| Laser Generator | Raycus/Max/IPG | ||||||
| Control System | Au3tech/Cypcut | ||||||
| Laser Cutting Head | Au3tech/Raytools/Boci | ||||||
| Transmission System | Rack Drive | ||||||
| Rack | VASTUN/Apex/YYC | ||||||
| Guide Rail | HIWIN | ||||||
| Gear Reducer | Motoreducer | ||||||
| Ball Screw | TBI | ||||||
| Servo Motor | Delta/Yaskawa | ||||||
| Electronic Components | Schneider | ||||||
| Pneumatic Components | SMC/AirTAC | ||||||
| Water Chiller | S&A/Hanli | ||||||
| Maximum Moving Speed | 100m/min | ||||||
| Maximum Acceleration | 1.0G | ||||||
| Positioning Accuracy | ±0.01mm | ||||||
| Repeat Positioning Accuracy | ±0.03mm | ||||||
| Voltage and Frequency | 380V 50Hz/60HZ | ||||||
| Comparison Item | Laser Cutting | Plasma Cutting | Waterjet Cutting | Mechanical Cutting |
|---|---|---|---|---|
| Cutting Principle | Focused laser beam melts/vaporizes material | Ionized gas (plasma arc) melts metal | High-pressure water with abrasives erodes material | Physical force using blades/tools |
| Material Compatibility | Metals, some non-metals | Conductive metals only | Almost all materials | Mostly metals and soft materials |
| Cutting Precision | Very high (±0.01–0.05 mm) | Medium (±0.1–0.5 mm) | High (±0.05–0.1 mm) | Low to medium |
| Edge Quality | Smooth, clean, minimal burr | Rougher, requires finishing | Smooth, no heat marks | Often requires deburring |
| Heat-Affected Zone (HAZ) | Very small | Large | None (cold cutting) | None or minimal |
| Cutting Speed | Very fast (especially thin metals) | Fast (thick metals) | Slow to medium | Medium |
| Thickness Capability | Medium to thick (depends on power) | Excellent for thick metals | Excellent for very thick materials | Limited by tool strength |
| Kerf Width | Very narrow | Wider | Medium | Wide |
| Material Deformation | Minimal | Moderate due to heat | None | Possible due to force |
| Automation Capability | Highly automated (CNC/robotic) | Automated | Automated | Semi-automatic or manual |
| Operating Cost | Medium to high (depends on laser type) | Medium | High (abrasives + maintenance) | Low to medium |
| Maintenance Requirements | Moderate (optics, source) | Moderate (consumables) | High (pumps, seals) | Low |
| Environmental Impact | Low emissions, clean process | Produces fumes and gases | No heat, but water disposal needed | Generates chips and noise |
| Noise Level | Low | High | High | Medium |
| Setup Time | Quick | Moderate | Longer setup | Quick |
| Tool Wear | No physical tool wear | Electrode/nozzle wear | Nozzle wear, abrasive usage | High tool wear |
| Ability for Complex Shapes | Excellent (fine details) | Good | Excellent | Limited |
| Secondary Processing Needed | Rarely | Often required | Rarely | Often required |
| Energy Efficiency | High | Medium | Low (high power consumption) | Medium |
| Typical Applications | Precision parts, electronics, automotive | Heavy metal fabrication, shipbuilding | Aerospace, composites, stone cutting | Basic fabrication, construction |
AccTek Laser integrates advanced laser technology into its cutting machines to deliver high precision, stable performance, and efficient cutting results. Their systems use reliable laser sources and optimized control systems, ensuring that operators achieve consistent cuts with minimal material waste. This innovation also helps in enhancing material quality while reducing the risk of thermal damage during the cutting process.
AccTek Laser offers a broad selection of laser cutting machines with different power levels and configurations to suit diverse application requirements. Customers can choose from compact, portable systems for small-scale operations to large industrial machines for high-volume cutting tasks. This makes it easy to find the right solution for cutting metal sheets, plastics, ceramics, and more, ensuring versatility for various industries.
AccTek Laser machines are built using top-quality components sourced from globally recognized suppliers. This includes durable laser sources, cutting-edge scanning systems, and reliable control electronics. By using premium parts, AccTek Laser enhances machine stability, extends service life, and ensures consistent performance under demanding operating conditions, ultimately reducing maintenance needs.
AccTek Laser provides flexible customization options to meet specific customer needs. Machine features like laser power, cutting speed, cooling systems, and automation integration can be tailored to suit different production environments and application requirements. This flexibility ensures that customers achieve optimal cutting performance, productivity, and cost-efficiency.
AccTek Laser offers comprehensive technical support throughout the entire purchase and operation process. Their experienced team assists with machine selection, installation, operation training, and troubleshooting. This level of support helps customers seamlessly adapt to laser cutting technology, ensuring smooth operations and quick issue resolution when necessary.
With years of experience serving customers globally, AccTek Laser provides dependable international service and support. They offer detailed documentation, remote assistance, and responsive after-sales service to help customers maintain their machines and minimize downtime. This ensures that customers can continue their operations with minimal disruptions, enhancing long-term productivity and customer satisfaction.
This article examines CO2 laser cutting machines, covering how they work, their key advantages and disadvantages, a direct comparison with fiber laser generators, and guidance on when to choose each
This article examines how cooling systems impact laser cutting machine performance, covering heat generation, cooling types, key parameters, effects on cutting quality, reliability, energy efficiency, and maintenance best practices.
This article explores the training and expertise needed to operate laser cutting machines effectively, covering core skills, technical training, safety compliance, CAD knowledge, and hands-on experience for professionals.
Learn the key environmental considerations and regulations for CO2 laser cutting machines, including emissions, ventilation, waste management, OSHA, EPA, and global compliance standards.
The price of a 1500w laser cutting machine can vary significantly based on several factors, such as the brand, quality, features, and machine size. Additional elements like shipping, installation costs, and local taxes can also influence the final price.
Generally, a 1500w laser cutting machine with basic functions will cost between $12,000 and $50,000. This price range typically includes a fiber laser generator, cutting head, CNC controller, bed, beam, auxiliary gas system, and safety features. However, if you choose to customize or add additional features—such as a full-enclosed laser protective cover, exchangeable worktables, or pipe-cutting capabilities—the price may increase.
It’s important to remember that while the initial cost is a key factor, the long-term value of a laser cutting machine is also determined by its reliability, ease of use, output quality, and operating efficiency. Despite the higher upfront cost, a 1500w laser cutting machine can offer significant cost savings and improve cutting efficiency, especially for high-volume or precision cutting applications.
For more information and to get a competitive price quote, AccTek Laser offers comprehensive support and warranty services tailored to your needs.
The 1500w laser cutting machine is specifically designed for cutting metal materials with high precision and speed. It is capable of cutting various types of metals, including:
Due to its high power, the 1500w laser cutting machine can handle a range of material thicknesses, from thin sheets to thicker metals, providing clean and accurate cuts. However, it cannot cut non-metallic materials such as wood, plastics, or composite materials. For these types of materials, a CO2 laser cutting machine is required. The machine excels in metal fabrication, making it ideal for industries like automotive, aerospace, metalworking, and electronics.
The 1500w laser cutting machine can typically cut metals with the following approximate thicknesses:
The exact cutting thickness can vary depending on the material type, quality of the laser, and cutting conditions (such as assist gas and cutting speed). For thicker materials, higher-wattage lasers (e.g., 2000w or 3000w) are often recommended.
The cutting speed of a 1500w laser cutting machine depends on several factors, including the material type, material thickness, laser settings, and the assist gas used. Below are general cutting speeds for common materials:
The 1500w laser cutting machine can generally cut through thinner metals at higher speeds, but the cutting speed decreases as the material thickness and hardness increase.
The power consumption of a 1500w laser cutting machine can be broken down based on its main components. Here’s a detailed breakdown of the estimated power usage:
This range depends on the specific model, system configuration, and operational conditions. The machine’s overall power consumption is higher than its cutting power due to the additional systems required for cooling, movement, and air compression.
The cutting accuracy of a 1500w laser cutting machine typically ranges from ±0.05 mm to ±0.1 mm depending on factors such as the material being cut, the thickness of the material, the quality of the laser, and the precision of the machine’s components. Key Factors Affecting Cutting Accuracy:
In general, a 1500w laser cutting machine is designed to provide high precision and is suitable for applications that require detailed cutting, such as in the automotive, aerospace, and electronics industries. However, achieving the highest accuracy depends on optimal settings, maintenance, and operating conditions.
Maintaining a 1500w laser cutting machine is essential for ensuring its smooth operation, maximizing its lifespan, and maintaining consistent cutting quality. Below are key maintenance practices for a 1500w laser-cutting machine:
By performing these regular maintenance tasks, you will ensure that your 1500w laser cutting machine operates efficiently, maintains cutting precision, and lasts longer. Always refer to the manufacturer’s manual for specific maintenance intervals and recommendations to maximize machine performance.
Our laser cutting machine is backed by a comprehensive warranty designed to give you peace of mind and protect your investment:
Please note that this warranty excludes damage resulting from improper use, mishandling, or other artificial causes.
4 reviews for 1500W Laser Cutting Machine
Gabriel –
We’ve been using this machine for both simple and more detailed jobs, and it handles both well. The structure feels strong, and the machine stays stable even during longer runs. I’ve noticed that the cuts are clean and consistent, which reduces rework. The controls are easy to understand, so new operators can learn quickly. It also responds well when we need to make small adjustments. Overall, it’s a dependable machine that fits well into our workflow and helps keep production steady.
Ivan –
We introduced this machine into our production line to improve efficiency, and it has delivered steady results. The build quality is strong, and it handles continuous operation without problems. The cutting results are consistent, which helps maintain our standards. My team didn’t take long to learn the system, which reduced downtime during setup. It also works well with our existing equipment. Overall, it’s a practical solution that supports our production needs without adding complexity.
Hannah –
I’ve worked with a few machines before, and this one is easier to handle than most. The system is simple, and I can adjust settings without slowing down my work. The movement feels smooth, and the machine doesn’t shake much. That helps keep everything accurate. The cuts come out clean, so I don’t have to spend extra time fixing them. Even during longer shifts, it keeps running without issues. It’s a reliable machine that makes my daily tasks more comfortable.
Fiona –
Since bringing this machine into our facility, planning has become more predictable. It runs reliably, so we can schedule jobs with more confidence. I’ve noticed fewer delays caused by machine issues, which helps us stay on track. The cutting quality remains consistent, even during busy periods. My team doesn’t spend much time troubleshooting, which improves efficiency. It fits well into our current setup and supports a smoother workflow. It’s a practical addition that helps keep daily operations running without extra pressure.